Isomax E-6 Flex Earset Microphone

(Hardwired to Standard XLR)

E6 Flex Directional Hardwired Version:

The E6 Flex Directional is perfect when you need a headset mic but don't want to see one. This is now the "Go To" mic for Theatre, Churches, Presenters, and anywhere a miniature headmic is in use. This version is wired to a standard XLR Mic connector and needs Phantom Power to operate correctly.

Isomax E-6 Flex Earset Microphone

(Wired to Bare End Wires)

E6 Flex Directional Pigtail Version:

The E6 D Flex is perfect when you need a headset mic but don't want to see one. This is now the "Go To" mic for Theatre, Churches, Presentations, and anywhere a miniature headmic is in use. This version is not wired to a connector, but comes with bare wire ends for wiring to your connector of choice.

Isomax E-6 Flex Earset Microphone

(NO CABLE)

E6-D Flex Mic and Boom Only:

The E6 D Flex is perfect when you need a headset mic but don't want to see one. This is now the "Go To" mic for Theatre, Churches, Presentations, and anywhere a miniature headmic is in use. This version HAS NO CABLE and must be connected to a cable on-site before it can be used.

To Use With:

AKG

PT40, PT60, 61, 80, 81, PT400, PT2000, PT4000

E6 Flex Directional Wired for AKG:

This mic is set up with the Switchcraft TA3F Connector for use with the AKG wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

AKG

PT51, PT300, PT900

E6 Flex Directional Wired for AKG:

This mic is set up with the B-LOC (3.5MM) Connector for use with the AKG wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

AudioLimited

TX2000,RMS-2000MXL

Wired for AudioLimited

This mic is set up with the Lemo 6pin Connector for use with the TX2000 wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Audio Technica

T27, 31, 51, 200, 210, 300, 310, 1400, 2000, and T3000

E6 Flex Wired for AT:

This mic is set up with the Hirose 4 pin Connector for use with the Audio Technica wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Audio Technica

T35, T75, T211, T601, T1000, T1200, T4000, T5000, T7000

Wired for AT:

This mic is set up with the Hirose 4 pin Connector for use with the Audio Technica wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

Wired for AT:

This mic is set up with the Switchcraft TA5F Connector for use with the U101 group wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Azden

WM-Pro, . WLT-Pro, WM22, 32BT, 31LT

Wired for Azden:

This mic is set up with the 3.5mm Connector for use with the WM group wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

BeyerDynamic

Opus Series,

TS-100,TS-300, TS-500,TS-800

Wired for Beyer:

This mic is set up with the TA4F Connector for use with the WM group wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Electrovoice

Wired for Electrovoice:

This mic is set up with the TA4F Connector for use with the 2000 group wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Electrovoice

Wired for Electrovoice:

This mic is set up with the TA4F Connector for use with the 300 group wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Lectrosonics

M170, M175

E6 Flex Wired for Lectro M170/175:

This mic is set up with the Swithcraft 851 Connector for use with the Lectrosonics wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

E6 Flex Wired for Lectro M185/187:

This mic is set up with the Switchcraft TA5F Connector for use with the Lectrosonics wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Lectrosonics

Wired for Lectro UM,LM:

This mic is set up with the Switchcraft TA5F Connector for use with the UM,LM series wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Lectrosonics

Wired for Lectro H Series:

This mic is set up with the Switchcraft A3M Connector for use with the H series wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Lectrosonics

Wired for Lectro M Series (over 185):

This mic is set up with the Switchcraft TA5F Connector for use with the M series wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Lectrosonics

Wired for Lectro MM400 Series:

This mic is set up with the Waterproof 2.5mm Connector for use with the MM400 series wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Lectrosonics

Wired for Lectro UH Series:

This mic is set up with the Switchcraft A3M Connector for use with the UH series wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Lectrosonics

Wired for Lectro UM Series:

This mic is set up with the Switchcraft TA5F Connector for use with the UMa,LMa series wireless beltpack.PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Lightspeed

Wired for Lightspeed BP200 Series:

This mic is set up with the Pushlock 4 pin Connector for use with the BP200 series wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Mipro

To Use With:

Mipro

To Use With:

NADY

To Use With:

Revolabs

To Use With:

Sabine

Wired for Sabine:

This mic is set up with the TA4F Connector for use with SW16T,30T wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Sabine

Wired for Sabine:

This mic is set up with the TA4F Connector for use with SW16TX wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Sabine

Wired for Sabine:

This mic is set up with the 2.5mm Connector for use with SW70 wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Samson

Wired for Samson:

This mic is set up with the 2.5mm Connector for use with Airline wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Samson

Wired for Samson:

This mic is set up with the TA3F Connector for use with CT,VT etc. wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Samson

Wired for Samson:

This mic is set up with the Hirose 6pin Connector for use with UT,TX etc. wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

SENNHEISER EW-Series

EW100, EW300,EW500 G2/G3, and SK1093

Wired for Sennheiser EW Series:

For use with the Sennheiser wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

SENNHEISER SK2012

Wired for Sennheiser SK2012:

MicroDot connector for use with the SK2012 Beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

SENNHEISER SK-2000

Wired for Sennheiser SK2000:

Lemo 3pin connector for use with the SK2000 Beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

SENNHEISER

SK50, SK250

SK3000 and SK5000 Series

Wired for Sennheiser SK50, SK250:

Lemo 3pin connector for use with the SK50 Beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

SENNHEISER BF 1083

Wired for Sennheiser BF1083:

Lemo 1pin connector for use with the SK50 Beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

SHURE

L-4,LX,ULX, SLX,U1,UR PGX,PG, and all Mini-XLR connections

E6 Flex Directional Wired with Shure TA4F Connectors:

Connector for use with the Shure wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

SHURE Ur, Lemo

Wired with Shure Lemo Connectors:

Connector for use with the Shure UR beltpacks PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Sony

WRT-28, WRT-820, WRT-860

Wired for Sony WRT28/820:

This mic is set up with the Twist lock type 4 pin Connector for use with the Sony wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Sony

WRT-805, WRT-806, UTX-B1,

UWP-806

Wired for Sony UTX/UWP:

This mic is set up with the Collared MiniPlug Connector for use with the Sony wireless beltpack used with the mentioned model numbers. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Sony

Wired for Sony WRT822/WRT8B:

This mic is set up with the 3.5mm Locking plug Connector for use with the Sony wireless beltpacks.PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Telex

Wired for Telex WT200,400,450:

This mic is set up with the Lemo 4 pin Connector for use with the Telex wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Telex

Wired for Telex TA4F Beltpacks:

This mic is set up with the TA4F Connector for use with the Telex wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

TOA

Wired for Toa TA4F Beltpacks:

This mic is set up with the TA4F Connector for use with the WM4300 wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

TOA

Wired for Toa 3.5mm Beltpacks:

This mic is set up with the 3.5mm Connector for use with the TOA wireless beltpacks. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

VEGA

Wired for Vega TA4F Beltpacks:

This mic is set up with the TA4F Connector for use with the Vega wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

To Use With:

Zaxcom

Wired for Zaxcom:

3 pin Lemo connector for use with Zaxcom TRX series wireless beltpack. PLEASE SPECIFY COLOR AND SENSITIVITY IN YOUR ORDER!

The E6 EarClip:

The ideal complement to the Countryman E6 EarSet microphones, the EarClip provides comfortable, adjustable, extremely low-profile two-ear support. (mic not included) Comes in Tan or Black.

The EarClip Cable Hook 1MM:

The EarClip cable hook attaches to the back of the EarClip to position and secure the E6 cable.

They come made for the 1mm, or the 2mm cable.

EarClip cable hooks are sold individually; please specify cable diameter and color. (tan or black)

The EarClip Cable Hook 2MM:

The EarClip cable hook attaches to the back of the EarClip to position and secure the E6 cable.

This is the clip for the 2mm cable.

EarClip cable hooks are sold individually; please specify cable diameter and color. (tan or black)

The EarSet Fequency Cap:

The E6 should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The three omni caps each have a different high frequency response characteristic that controls the amount of "crispness" or "sibilance" (response at 15 kHz). The 3 responses are Flat, +4, and +8 . Caps come in Microphone colors Price is for one cap.

E6 Foam Windscreens:

These help with wind and "P" blasts, and are a further protection to the mic. They come in the colors of the E6

E6 Clothing Clip:

This clip is used to guide the E6 cable down to the wireless beltpack, or XLR connection. Comes in pairs, one black one white.

E6 Belt Clip:

This simply allows the cable XLR connection to be attached to the user's belt.

AXBPM

Countryman AXBPM Phantom Power Supply

This is a battery powered, portable phantom power supply that allows the XLR version of Countryman Microphones to be used with Digital recorders and camcorders.